Description
2-inch High Flow Petrol Water Pump
This water pump features a 50mm (2″) inlet and outlet delivering an impressive flow rate of 30 000L/h (500L/min) with a total head of 30m. It is powered by a robust 210cc 3600rpm 4-stroke engine capable of transferring water up to four storeys high with ease.
Designed with a centrifugal pump and advanced impeller design this pump minimizes discharge loss. The suction entry on both sides of the impeller ensures axial balance providing consistent performance that is directly proportional to engine throttle.
The motor assembly is protected by an anti-corrosive tubular steel frame while durable ceramic and carbon seals enhance longevity. The 3.6L fuel tank allows for extended operation on a single fill depending on the load.
Additional features include a 100% duty cycle for continuous use an ultra-fine air filter an easy start pull system shock-absorbing and noise-reducing rubber feet along with bonus hose fittings and an inlet filter for straightforward setup.
Features
- 8hp high flow petrol water pump
- Flow rate of 30 000 L/h (500L/min)
- Anti-corrosive alloy pump housing
- Ceramic and carbon seals
- Full 50mm (2″) inlet / outlet
- Solid impeller
- Gearless direct drive
- 100% duty cycle
- Easy start pulling system
- Bonus hose fittings and inlet filter
- Anti-shocking and noise-reducing rubber feet
- Ultra-fine air filter
Specifications
- Engine type: 4-stroke OHV Air-cooled
- Engine power: 8hp
- Displacement: 210cc
- Flowing volume: 30 000L/hour (500L/min)
- Fuel capacity: 3.6L
- Fuel type: Regular unleaded 95+ RON
- Engine oil type: 10W-30/ 10W-40/ 15W-30/ 15W-40 non-synthetic engine oil (not included)
- Speed: 3 600rpm
- Output size: 50mm (2″)
- Input size: 50mm (2″)
- Lift: 30m
- Suction: 8m
Package Content
- 1 x Water Pump
- 2 x Hose Fitting
- 1 x Inlet Filter
- 1 x Assemble Tool
- 3 x Hose Clip
- 1 x User Manual
